A guide to accessing historical reports from pathology providers Category Handbook Organisation Standards Australia ID SA HB 5530-2013 Type Standard Access Fees apply to access Status Active Created Sep-13 Medical practice often requires obtaining historical patient pathology test results, usually when the patient is first seen by a service, or when a patient transfers between providers. This handbook outlines a mechanism for requesting copies of pre-existing reports from pathology providers.
Advance care directive custodian location, Part 1: Logical content specification Category Specification Organisation Standards Australia ID SA TS 90008.1:2014 Type Standard Access Fees apply to access Status Active Created 2014 This technical specification describes the essential clinical data groups and elements to be captured in an advance care directive custodian record exchange and the constraints that should be applied.
Advance care directive custodian location, Part 2: CDA implementation guide Category Specification Organisation Standards Australia ID SA TS 90008.2:2014 Type Standard Access Fees apply to access Status Active Created 2014 This technical specification describes constraints on the CDA and, where necessary, custom extensions to the CDA, for the purpose of fulfilling the requirements for Australian implementations of advance care directives.
AS 4700.1.2.4:2014 Implementation of Health Level Seven (HL7) Version 2.4, Part 1.2.4: Patient administration Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created May-14 This standard defines a uniform implementation of chapter 3 of the HL7 Version 2.4 protocol. It aims to enable the greatest degree of standardisation possible in the exchange of patient administration data among various healthcare computer applications in Australia using HL7 Version 2.4.
AS 4700.1.2.5:2014 Implementation of Health Level Seven (HL7) Version 2.5 and Version 2.5.1, Part 1.2.5: Patient administration Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created May-14 This standard defines a uniform implementation of chapter 3 of the HL7 Version 2.5 and Version 2.5.1 protocols. It aims to enable the greatest degree of standardisation possible in the exchange of patient administration data among various healthcare computer applications in Australia using HL7 Version 2.5, as well as HL7 Version 2.5.1 where applicable.
AS 4700.2-2012 Implementation of Health Level Seven (HL7) Version 2.4, Part 2: Pathology and diagnostic imaging (diagnostics) Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created Dec-12 This standard provides requirements and guidance for implementing electronic messages to exchange information on pathology and diagnostic imaging orders and results using the HL7 Version 2.4 protocol. It aims to specify message formats and code sets for communicating such orders and results within and between Australian healthcare settings.
AS 4700.3:2014 Implementation of Health Level Seven (HL7) Version 2.5, Part 3: Electronic messages for exchange of information on medicines prescription Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created Aug-14 This standard covers implementing electronic messages to exchange information on medicines prescriptions in the community and hospital environment using the HL7 Version 2.5 protocol. It covers implementation of the protocol for communication between prescribers, dispensers and their healthcare trading partners in Australia.
AS 4700.6-2013 Implementation of Health Level Seven (HL7) Version 2.5, Part 6: Referral, discharge and health record messaging Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created May-13 This standard provides guidance for implementing communication of clinical patient-centred information between health service providers using the HL7 Version 2.5 protocol. It focuses on the HL7 discharge and referral, shared care and event summary messages.
AS 5021-2005 The language of health concept representation Category Standard Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created Jun-05 This standard provides agreed definitions of terms used for health concept representation in Australia and a coherent vocabulary of the central concepts of terminology.
ATS 5546-2013 E-health endpoint location service Category Specification Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created Dec-13 This standard defines the technical service specification for the Endpoint Location Service and contains the requisite datatypes and interfaces and behaviours. It also provides conformance criteria intended for unambiguous operation between clients and service providers.
CDA rendering interoperability specification Category Specification Organisation Standards Australia ID SA TS 90009:2014 Type Standard Access Fees apply to access Status Active Created Aug-14 This technical specification describes principles for clinical document architecture (CDA) rendering interoperability and its anticipated benefits. It also provides rendering requirements for constructing and presenting CDA documents.
Consumer entered information, Part 1: Logical content specification Category Specification Organisation Standards Australia ID SA TS 90007.1:2014 Type Standard Access Fees apply to access Status Active Created 2014 This technical specification describes the essential clinical data groups and elements to be captured in a consumer entered health summary exchange and the constraints that should be applied. This is Part 1 of 2 specifications on consumer-entered information.
Consumer entered information, Part 2: CDA implementation guide Category Specification Organisation Standards Australia ID SA TS 90007.2:2014 Type Standard Access Fees apply to access Status Active Created 2014 This technical specification helps implement the logical model detailed by SA TS 90007.1 as an HL7 Clinical Document Architecture Release 2 (CDA) XML document. This is Part 1 of 2 specifications on consumer-entered information.
Core discharge summary, Part 1: Structured document template Category Specification Organisation Standards Australia ID ATS 90006.1-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification specifies and defines the complete set of data elements proposed for use to support the creation of a valid and interoperable discharge summary instance.
Digital images for diagnostic and other clinical purposes: Presentation, communication, display and manipulation Category Specification Organisation Standards Australia ID ATS 5816-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification defines the requirements for the presentation, communication, display and manipulation of digital images that are to be used for primary and secondary diagnosis.
E-health Interoperability Framework v2013 Category Handbook Organisation Standards Australia ID SA HB 137-2013 Type Standard Version 2013 Access Fees apply to access Status Active Created Jun-13 This Standards Australia handbook describes a framework for specifying and achieving interoperable e-health systems.
E-health secure message delivery Category Specification Organisation Standards Australia ID ATS 5822-2010 Type Standard Access Fees apply to access Status Superseded Created Mar-10 This document describes a set of user interfaces and applications that support secure electronic message delivery between different healthcare providers.
E-health secure message delivery v2013 Category Standard Organisation Standards Australia ID AS 5552-2013 Type Standard Version 2013 Access Fees apply to access Status Active Created Dec-13 This document is the Australian Standard for e-health secure message delivery.
E-health web services profiles Category Specification Organisation Standards Australia ID ATS 5820-2010 Type Standard Access Fees apply to access Status Superseded Created Mar-10 This document defines profiles of the SOAP web services specifications.
E-health web services profiles Category Standard Organisation Standards Australia ID AS 5550-2013 Type Standard Access Fees apply to access Status Active Created Dec-13 This document describes the Simple Object Access Protocol (SOAP) web services specifications and a base set of specifications that define interoperable and secure web services for e-health.
E-health XML secured payload profiles Category Standard Organisation Standards Australia ID AS 5551-2013 Type Standard Access Fees apply to access Status Active Created 2013 This standard defines mechanisms for representing signed XML fragments and encrypted XML fragments.
E-health XML secured payload profiles Category Specification Organisation Standards Australia ID ATS 5821-2010 Type Standard Access Fees apply to access Status Superseded Created Mar-10 This document describes how to represent digital signatures and how to encrypt data in XML.
Electronic transfer of prescriptions, Part 1: Platform independent (logical) information model to support electronic transfer of prescriptions Category Specification Organisation Standards Australia ID ATS 4888.1-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification is for a platform-independent (logical) information model for an electronic prescription, specifying the information structure of e-prescriptions, to support the electronic transfer of prescriptions (ETP). This is Part 1 of 6.
Electronic transfer of prescriptions, Part 2: Platform independent (logical) services model to support electronic transfer of prescriptions Category Specification Organisation Standards Australia ID ATS 4888.2-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification outlines an electronic transfer of prescriptions (ETP) solution for the generation and transfer of electronic prescriptions and associated dispensing records between participating prescribers and dispensers. This is Part 2 of 6.
Electronic transfer of prescriptions, Part 3: Platform implementation specific e-prescription HL7 Clinical Document Architecture implementation guide Category Specification Organisation Standards Australia ID ATS 4888.3-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification provides requirements for implementing the logical model detailed in ATS 4888.1 as an HL7 Clinical Document Architecture Release 2 (CDA) XML document. This is Part 3 of 6.
Electronic transfer of prescriptions, Part 4: Platform implementation specific dispense record HL7 Clinical Document Architecture implementation guide Category Specification Organisation Standards Australia ID ATS 4888.4-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification provides requirements for implementing the logical model of a dispense record detailed in ATS 4888.1 as an HL7 Clinical Document Architecture Release 2 (CDA) XML document. This is Part 4 of 6.
Electronic transfer of prescriptions, Part 5: Platform implementation specific prescription request HL7 Clinical Document Architecture implementation guide Category Specification Organisation Standards Australia ID ATS 4888.5-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification provides requirements for implementing the logical model of a prescription request detailed in ATS 4888.1 as an HL7 Clinical Document Architecture Release 2 (CDA) XML document. This is Part 5 of 6.
Electronic transfer of prescriptions, Part 6: Platform implementation specific web service Category Specification Organisation Standards Australia ID ATS 4888.6-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification defines an implementable, platform-dependent technical services specification for an electronic transfer of prescriptions package using web services. This is Part 6 of 6.
Guide to HL7 V2 message parsing and management of character escaping with reference to backward compatibility Category Technical Report Organisation Standards Australia ID TR 5416-2012 Type Standard Access Fees apply to access Status Active Created Feb-12 This technical report describes HL7 V2 message parsing and management of character-escaping with reference to backward compatibility.
Guide to the principles and desirable features of clinical decision support systems Category Handbook Organisation Standards Australia ID HB 307-2007 Type Standard Access Fees apply to access Status Active Created 2007 This handbook defines the type of clinical decision support systems used in health care and identifies the principal elements of quality systems.
Guidelines for messaging between diagnostics providers and health service providers Category Handbook Organisation Standards Australia ID HB 262-2012 Type Standard Access Fees apply to access Status Active Created 2012 This handbook supports AS 4700.2-2007, which is the standard for implementing external messaging using HL7 between diagnostics providers and all health service providers in Australia, using HL7 Version 2.4.
Health Care Client Identification Category Standard Organisation Standards Australia ID AS 5017-2006 Type Standard Access Fees apply to access Status Superseded Created Jun-06 This standard is a voluntary code of practice. It provides a framework for improving the positive identification of clients in health care organisations.
Health indicators conceptual framework Category Standard Organisation Standards Australia ID AS 21667-2012 Type Standard Access Fees apply to access Status Active Created Dec-12 This standard adopts ISO 21667:2010 to establish a conceptual framework for common health indicators. It is intended to foster a common vocabulary and conceptual definitions.
Health informatics - Classification of purposes for processing personal health information Category Standard Organisation Standards Australia ID ATS ISO 14265-2013 Type Standard Access Fees apply to access Status Active Created 2013 This technical specification defines a set of high-level categories of reasons for which personal health information can be processed.
Health informatics - Information security management in health using ISO/IEC 27002 Category Standard Organisation Standards Australia ID AS ISO 27799:2023 Type Standard Access Fees apply to access Status Active Created 2023 This standard adopts ISO 27799:2016, which provides guidelines for organisation-wide information security standards and information security management practices.
Health informatics - International patient summary Category Standard Organisation Standards Australia ID AS ISO 27269:2022 Type Standard Access Fees apply to access Status Active Created 2022 This standard defines the core dataset for a patient summary document that supports continuity of care for a person and coordination of their health care.
Health informatics - Metadata repository requirements (MetaRep) Category Specification Organisation Standards Australia ID SA TS ISO 21526:2022 Type Standard Access Fees apply to access Status Active Created 2022 This technical specification identically adopts ISO/TS 21526:2019, which provides requirements for collections of metadata about data elements and their containing models and datasets in a healthcare environment.
Health informatics - Representation of categorial structures of terminology (CatStructure) Category Standard Organisation Standards Australia ID AS ISO 17115:2022 Type Standard Access Fees apply to access Status Active Created 2022 This standard defines a set of basic concepts for describing: formal concept representation systems, representation of concepts and characteristics for formal computer-based concept representation systems, and the characteristics that describe the organisation and content of a terminological system in health.
Health informatics - Requirements for an electronic health record architecture v2022 Category Standard Organisation Standards Australia ID AS ISO 18308:2022 Type Standard Version 2022 Access Fees apply to access Status Active Created Jul-22 This document describes the requirements for an electronic health record (EHR) architecture: the architecture of a system that processes, manages and communicates EHR information.
Health informatics - Telehealth services - Quality planning guidelines v2 Category Standard Organisation Standards Australia ID AS ISO 13131:2022 Type Standard Version 2 Access Fees apply to access Status Active Created Jul-22 This document describes how to analyse risks to quality, safety and continuity of care when telehealth services are used.
Health informatics - Terminology resource map quality measures (MapQual) Category Specification Organisation Standards Australia ID SA TS ISO 21564:2022 Type Standard Access Fees apply to access Status Active Created 2022 This technical specification identically adopts ISO/TS 21564:2019, which provides quality requirements for producing a quality map between terminological systems.
Health records, Part 1: Paper health records v2019 Category Standard Organisation Standards Australia ID AS 2828.1:2019 Type Standard Version 2019 Access Fees apply to access Status Active Created Jul-19 This standard specifies minimum requirements for the physical aspects of paper health records, aiming to ensure that they are fit for purpose, easy to use and consistent, and that they meet legal, safety and quality requirements.
Health records, Part 2: Digitized health records v2019 Category Standard Organisation Standards Australia ID AS 2828.2:2019 Type Standard Version 2019 Access Fees apply to access Status Active Created Jul-19 This standard specifies the requirements for digitisation (scanning) of paper health records.
Health software and health IT systems safety, effectiveness and security - Part 2-1: Coordination - Guidance and requirements for the use of assurance cases for safety and security Category Technical Specification Organisation Standards Australia Type Standard Access Fees apply to access Status Active Created Jan-25 This document establishes requirements and gives guidance on assurance case framework for healthcare delivery organisations (HDOs) and for health software and medical device manufacturers (MDMs) and can be used to support the communication and information transfer between all parties.
Health software and health IT systems safety, effectiveness and security, Part 1: Principles and concepts Category Standard Organisation Standards Australia ID AS ISO 81001.1:2022 Type Standard Access Fees apply to access Status Active Created 2022 This standard identically adopts ISO 81001 1:2021, which provides the principles, concepts, terms and definitions for health software and health IT systems, key properties of safety, effectiveness and security, across the full life cycle, from concept to decommissioning.
Health software, Part 1: General requirements for product safety Category Standard Organisation Standards Australia ID AS IEC 82304.1:2022 Type Standard Access Fees apply to access Status Active Created 2022 This standard identically adopts IEC 82304 1:2016, which provides requirements for the safety and security of health software products designed to operate on general computing platforms and intended to be placed on the market without dedicated hardware, with a primary focus on the requirements for manufacturers.
Health Supply Chain Messaging - Evaluated receipts settlement Category Specification Organisation Standards Australia ID ATS 5038-2006 Type Standard Access Fees apply to access Status Active Created 2006 This technical specification documents a model for the use of electronic messaging in support of evaluated receipts settlement (ERS) in the health industry supply chain.
Health Supply Chain Messaging, Part 1: Messaging rules and process logic Category Standard Organisation Standards Australia ID AS 5023.1-2003 Type Standard Access Fees apply to access Status Active Created 2003 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 1 of 6 related standards on health supply chain messaging.
Health Supply Chain Messaging, Part 2: Datasets Category Standard Organisation Standards Australia ID AS 5023.2-2003 Type Standard Access Fees apply to access Status Active Created 2003 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 2 of 6 related standards on health supply chain messaging.
Health Supply Chain Messaging, Part 3: Messaging rules and process logic - Secondary transactions Category Standard Organisation Standards Australia ID AS 5023.3-2004 Type Standard Access Fees apply to access Status Active Created 2004 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 3 of 6 standards on health supply chain messaging.
Health Supply Chain Messaging, Part 4: Dataset content - Secondary transactions Category Standard Organisation Standards Australia ID AS 5023.4-2004 Type Standard Access Fees apply to access Status Active Created 2004 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 4 of 6 standards on health supply chain messaging.
Health Supply Chain Messaging, Part 5: Messaging rules and process logic - Turnover order, turnover order status, rebate claim, rebate claim response Category Standard Organisation Standards Australia ID AS 5023.5-2005 Type Standard Access Fees apply to access Status Active Created 2005 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 5 of 6 standards on health supply chain messaging.
Health Supply Chain Messaging, Part 6: Dataset content - Turnover order status, rebate claim, rebate claim response Category Standard Organisation Standards Australia ID AS 5023.6-2005 Type Standard Access Fees apply to access Status Active Created 2005 This standard specifies messaging guidelines for electronic hospital supply chains to support the formal collection, storage and transmission of data within hospital electronic supply chains. This is Part 6 of 6 standards on health supply chain messaging.
Healthcare identifier HL7 implementation guide Category Handbook Organisation Standards Australia ID SA HB 234-2012 Type Standard Access Fees apply to access Status Active Created 2012 This handbook provides an implementation guide for Australian healthcare related identifiers that details how these identifiers are communicated in systems using the AS 4700 series implementation standards for HL7 v2.3, v2.3.1, v2.4 and v2.5 patient administration messages, as well as CDA.
Healthcare identifier HL7 implementation guide - AMDT 1 Category Handbook Organisation Standards Australia ID SA HB 234-2012 AMDT 1 Type Standard Access Fees apply to access Status Active Created 2012 This is an amendment to SA HB 234-2012 Healthcare identifier HL7 implementation guide.
HL7 V2 E-referral implementation profile Category Specification Organisation Standards Australia ID SA TS 5338:2014 Type Standard Access Fees apply to access Status Active Created 2014 This technical specification provides an Australian integration profile for implementation and testing of HL7 messages focusing on AS 4700.6 for referral messaging, and supports all types of referrals as covered by AS 4700.6.
Person and provider identification in healthcare Category Specification Organisation Standards Australia ID AS 4846:2014 Type Standard Access Fees apply to access Status Active Created Aug-14 This document provides the health industry with a standard for healthcare provider and individual identification data, which includes processes for clinical and administrative data management purposes (data structure, process and specification).
Pseudonymization Category Standard Organisation Standards Australia ID ATS ISO 25237-2011 Type Standard Access Fees apply to access Status Active Created 2011 This technical specification provides principles and requirements for privacy protection using pseudonymisation services for the protection of personal health information.
SA HB 138-2013 E-health architecture principles v2013 Category Handbook Organisation Standards Australia ID SA HB 138-2013 Type Standard Version 2013 Access Fees apply to access Status Active Created Jun-13 This document describes the e-health architecture principles that can guide the development of interoperable e-health architecture in Australia.
Survey of standards environment for telehealth devices Category Supplementary Resource Organisation Standards Australia ID MP 54-2012 Type Standard Access Fees apply to access Status Active Created Mar-12 This document provides a survey of the existing standards environments that would affect the further development of standards to apply to devices used for telehealth purposes.
Telehealth: Remote Patient Monitoring — Discussion Paper Category Supplementary Resource Organisation Standards Australia ID MP 120-2012 Type Standard Access Fees apply to access Status Active Created Feb-12 This discussion paper provides a generic framework for computer-assisted and computer-based component activities supporting chronic disease management that involve some aspects of remote patient monitoring.